MANI TOOLING · DESIGN & ENGINEERING SERVICESCoimbatore, India Global project support manitooling@gmail.com
ENGINEERING PARTNER FOR GLOBAL TOOLROOMS

Precision begins before the mould is made.

Injection mould design, pressure die-casting tool design and production-focused CAD support. From part feasibility to detailed tool assemblies—engineering made ready for the next step.

2021Business established
India · GlobalRemote project support
CAD → DetailDefined design deliverables
Mould design projects and CAD tooling assemblies completed for Mani Tooling clients
MOULD ENGINEERING / 01Design intent, made visible.
ENGINEERING FOCUSCore / Cavity
Mould design processConcept → CAD → Detail
◇
Injection mouldsPart-to-tool engineering
▧
Die-casting toolsDie layout & detailing
⌁
DFM approachManufacturability-led
↗
Overflow designDefined project packages
OUR CORE CAPABILITIES

Specialist tooling design.
Built around real manufacturing needs.

From the first geometry review to toolroom drawings, each project starts with clearly defined inputs and deliverables.

Representative injection mould assembly with tray product and cooling layout
01 / Primary service

Injection mould design

Core and cavity, inserts, cooling, ejection and full mould-base development built around part and production requirements.

Cooling layoutsMould assemblies

Explore service

Completed client cylindrical frame mould assembly showing tool steel detailing and component
02 / Complex tooling

Complex mould & tooling design

Cylindrical-frame mould detailing, core/insert arrangement, guide components and specialised tool mechanisms for complex parts.

Complex mechanismsCylindrical-frame detailing

Explore service

2D mould assembly drawing with technical section views, dimensions and annotations
03 / Mould detailing

Mould detailing & CAD

Production-oriented CAD detailing, part drawings, BOM structure and revision-controlled data prepared for the toolroom.

Detail drawingsRevision control

Explore service

Copper EDM electrodes and machined steel cavity insert
04 / Separate CAD service

EDM electrode design

Copper/graphite electrode geometry, holder interfaces, datum references and detailed drawings derived from approved mould inserts.

Electrode modelsHolder & drawing data

Explore service

01

Design for manufacturability

Part analysis, moulding assumptions, draft, parting and practical manufacturing considerations.

02

Plastic product engineering

Component modelling, fit, ribs, bosses and interfaces for tooling-ready product definition.

03

Mould-flow collaboration

Simulation input preparation and result review when included in the agreed project scope.

ENGINEERING IS IN THE DETAILS

Part geometry is the input.
Reliable documentation is the output.

We work from a defined brief and agreed CAD standard, with attention to functional tool components, manufacturing drawings and controlled design changes.

Explore engineering scope
Core & cavity splitsSliding core conceptsReplaceable insertsCooling channelsEjector systemsRunner & gate layoutsAssembly / BOM2D manufacturing drawingsDFM & CAD revisions
SELECTED CLIENT PROJECTS

Completed mould design projects for direct clients.

Explore selected tooling design assignments, from product geometry and mould assemblies to detailed engineering drawings.

Completed client design - Rounded enclosure cover mould
Injection Mould Design

Rounded enclosure cover mould

Two steel mould halves and the corresponding smooth rounded cover.

Core / cavityParting layout
Completed client design - Impeller mould development
Injection Mould Design

Impeller mould development

Completed impeller tooling design work with radial blade geometry and matching mould views.

Blade geometryMould planning
Completed client design - Shallow tray injection mould
Injection Mould Design

Shallow tray injection mould

Client tray mould design showing two tooling halves, cooling connections and the plastic part.

Core / cavityCooling layout
Completed client design - Four-compartment organizer mould
Special Tool Design

Four-compartment organizer mould

Mould-design work for a hinged organizer with four internal compartments.

Multi-compartmentCore features
Completed client design - Circular cover mould
Injection Mould Design

Circular cover mould

Circular cover component with a raised centre feature and mating mould halves.

Circular geometryCentre boss
Completed client design - Ribbed panel mould detailing
CAD & Tooling Detail

Ribbed panel mould detailing

Tooling surfaces for a thin panel with a clean exterior and ribbed reverse side.

Rib featuresInsert layout
Completed client design - Cylindrical frame mould detailing
CAD & Tooling Detail

Cylindrical frame mould detailing

Steel mould assembly views and separate cylindrical-frame component.

Tool componentsAssembly presentation
Completed client design - T-handle injection mould
Injection Mould Design

T-handle injection mould

Steel mould halves shown with a T-shaped grip component.

Handle geometryMould halves
Completed client design - 2D mould assembly & detail drawings
2D Engineering Drawings

2D mould assembly & detail drawings

2D assembly drawings with orthographic views, sections and dimensions.

Assembly drawingsSection views

Selected engineering design assignments completed for direct clients.

HOW WE WORK

A structured path from requirements to release.

An efficient outsourced design project needs clear assumptions, agreed review points and controlled outputs.

STEP 01

Input review

Part data, standards, production objectives and missing information.

STEP 02

DFM / feasibility

Discuss parting, draft, functional features and relevant risks.

STEP 03

Concept layout

Define tool architecture, inserts and engineering design approach.

STEP 04

Detailed CAD

Develop assemblies, components, drawings and BOM as agreed.

STEP 05

Review & release

Track comments, revisions and final handover deliverables.

What clients receive: a defined deliverables list, agreed CAD/drawing format and a clear revision process. Manufacturing/tool trials are separate from design unless expressly scoped.

Send your RFQ
Completed client mould tooling and component design work
One brief. Clear outputs.Dedicated design capacity without a manufacturing-facility claim.
A PRACTICAL ENGINEERING PARTNER

Expertise when your design workload grows.

Mani Tooling is an owner-led engineering service, established in Coimbatore in 2021. We support toolrooms, OEMs and manufacturing engineers through project-based CAD and tooling-design work.

  • Flexible support for peak workloads and design backlogs
  • DFM-minded engineering and toolroom documentation
  • Native CAD and manufacturing drawing formats agreed at kickoff
  • Confidential information handled within the agreed project process
Get to know Mani Tooling
SECONDARY SPECIALIST CAPABILITY

Pressure-vessel & static equipment engineering.

Secondary specialist support for pressure-vessel mechanical design review, calculations, equipment layouts and fabrication drawing review.

ASME VIII design review supportGA / fabrication drawingsTechnical review logs

View secondary capability →

Horizontal pressure vessel with saddle supports and flanged connections
READY FOR YOUR NEXT PROJECT?

Send the part. We'll help define the engineering.

Share your input, target deliverables and timeline for a scoped proposal.

Discuss your requirement